|
We are pleased to provide the following information to assist seafarers from around the world. However, neither Safety at Sea (Australasia)Pty Ltd nor its agents will have any responsibility or liability for any inaccuracies, falsehoods or errors in the information. For further information please see our disclaimer notice.
The SEEMATZ searchlights
are constructed of seawater resistant aluminium and have extra-hardened
BI-VETRAL safety front panes. The reflectors are made of aluminium, on
request it will be possible to install a 400W heating into all searchlights
with 230VAC input power. SEEMATZ searchlights
are destined to facilitate service. The backside of the searchlights can
be opened without using tools by quick-release snaps. Also the cable glands
are mounted on the backside cover. This makes it possible to remove the
complete plug-in unit incl. the mirror; lamp, socket and the heating only
by unlock the quick-release snaps. This can be important
in case of bad weather conditions!! The column types are
designed to operate inside from the wheelhouse. The construction is totally
watertight and easy to install. After cutting a hole, the column can be
inserted smoothly into the roof. This installation is secure and elegant
even at roofs with a thick insulation. SEEMATZ manual steering
is available in two different diameters (80 or 100mm). Every searchlight
from the 273 up to the 463 types can be mounted on a 80mm pedestal, except
the 463 searchlights with HBO, HMI or XBO lamp. This searchlights and
also every searchlight type 525 must be mounted on a 100mm pedestal. 273, 351, 463, 525
and 750 - kind of type = reflector diameter in millimetre. HGS = Halogen lamp DS = direct operation
at the searchlight
|